New Current Sensors – Industrial
Phoenix Contact ECM UC Current Measuring Transducers provide precise measurement and intuitive device configuration via web-based management. Phoenix Contact ECM UC Current Measuring Transducers detect AC, DC, and distorted currents from 0A to 100mA or 0A to 100A with a high measuring accuracy of <0.5%. Modbus/RTU and Modbus/TCP versions offer further digital processing of measured data. The ECM UC is reliable at temperatures down to -40°C and installation altitudes of up to 4000m.
-
Phoenix Contact ECM UC Current Measuring TransducersProvides precise measurement and intuitive device configuration via web-based management.21.01.2026
-
Amphenol HCSO-1W Automotive Hall Effect Current SensorsDesigned for accurate current measurement in automotive and industrial applications.05.12.2025 -
Littelfuse CH1B050P Pyro-fuse TriggerOpen-loop Hall technology detects overcurrent and provides output signal to activate pyro module.24.10.2025 -
Littelfuse CH1B032B Current SensorProvides a ratiometric output signal proportionate to magnetic flux density generated by the C-core.24.10.2025 -
Pulse Electronics Flexible Rogowski Coil FLRC Current SensorsSplit-core design that allows direct mounting on the primary conductor without circuit interruption.02.10.2025 -
Littelfuse CH1P01xM Current SensorsRatiometric output signal proportional to magnetic flux density generated by a C-core concentrator.02.10.2025 -
Bourns SSA-2 Analog Shunt Sensors100A to 1000A nominal current range, 1500VDC reinforced isolation, & ±0.1% sensing accuracy.02.04.2025 -
LEM HO Multi-Range Current TransducersDesigned for precise DC, AC, and pulse current measurement with prim/sec circuit galvanic isolation.24.03.2025 -
LEM HAT Current SensorsDesigned for accurate electronic measurement of DC, AC, and pulsed currents.24.03.2025 -
Littelfuse CH1S010B Current SensorsOpen-loop Hall-effect current sensors with dual-channel ratio-metric output signals.31.01.2025 -
Bourns SSD-250A Shunt Current SensorsFeatures a 100A to 1000A nominal current, RS485/MODBUS interface, and 5kHz bandwidth.08.01.2025 -
Advantech EVA-2000 Sensors & MetersDesigned for LoRaWAN wireless connectivity and built to be easy to deploy & maintain.15.08.2024 -
Bourns SSD Shunt Current SensorsFeature CANbus or RS-485 interface and ECC flash memory with autocorrect single bit errors.03.07.2024 -
Honeywell CSNV500, CSNV1500, and CSSV1500 current sensorsMulti-point temperature characterisation and calibration for improved accuracy within a range from -40°C to +85°C.21.02.2024 -
Banner Engineering S15S Rogowski Coil Current Sensors50mm and 200mm coils with up to 6000A current, ideal for monitoring nearly any piece of equipment.19.01.2024 -
Tamura L55S D15 Open-Loop Current SensorsOffers an open-loop current sensor suitable for middle-powered general inverters.19.01.2024 -
Pulse Electronics Rogowski RC01/03/05/07 Coil Current SensorsAvailable in different sizes with a wide dynamic measurement range with excellent linearity.27.06.2023 -
Amphenol HCSP-3BS Current SensorThree-phase open loop sensors with busbar mounting.14.04.2023 -
Ohmite ES-600 Automotive-Grade Current Sensing ModulesFeatures 5KV galvanic isolation and an IP40-compliant housing design.20.03.2023 -
Honeywell CSNV700 Flux Gate Current SensorsHigh accuracy, low-temperature drift, and offer an excellent mix of performance and reliability.14.02.2023 -
Honeywell CSHV Open Loop Current SensorsOffers high accuracy and is created for a primary current measurement range of ±100A to ±1500A DC.27.01.2023 -
Amphenol HCSP-1BS Automotive Open Loop Current SensorsOffers a 4.5V to 5.5V supply voltage range, 14mA maximum supply current, and 3μs response time.25.11.2022 -
MultiTech LoRaWAN Wireless IoT SensorsDesigned for long-range and extended battery life applications.30.03.2022 -
MultiTech Wireless Sensors/BridgesDesigned to detect a connection between two wires.30.03.2022