TE Connectivity / DEUTSCH DTM Connectors
TE Connectivity's (TE) DEUTSCH DTM Connectors feature a miniature contact with an enhanced design based on the DEUTSCH DT series. The DTM is designed for use in harsh environment applications where reliable signal circuits are critical to operating performance. Typical applications include on or around the engine, the transmission, and under the hood. TE DTM connectors provide peak connector performance everywhere data signals or critical electronic circuits are needed. The connectors are made of rugged thermoplastic and feature silicone rear-wire and interfacial seals that withstand extreme temperature and moisture.
Features
- Rugged thermoplastic housing
- Integral connector latch
- -55°C to +125°C operating temperature
- 2, 3, 4, 6, 8, and 12 contact arrangements
- Rugged thermoplastic material
- Silicone rear-wire and interfacial seals allow the connectors to withstand conditions of extreme temperature and moisture
- Accepts AWG16 through AWG22 (2.50mm2 to 0.35mm2)
- 250VDC operating voltage
- Crimp contacts with option of gold or nickel finish, solid or stamped construction
- 5A/7.5A current rating all contacts at +125°C continuous
- Hand insertable/removable contacts
- Cost-effective design
- 1500V, IP67 to IP6K 9K, 20G at 10Hz to 2000HZ
Specifications
- -55°C to +125°C continuous operating temperatures at rated current
- Durability - no electrical or mechanical defects after 100 cycles of engagement and disengagement
- Vibration - no unlocking or unmating, and exhibits no mechanical or physical damage after sinusoidal vibration levels of 20Gs at 10Hz to
- 2000Hz in each of the three mutually perpendicular planes - no electrical discontinuities longer than 1ms
- Physical shock - no unlocking, unmating, or other unsatisfactory result during or after 50Gs in each of three mutually perpendicular planes - no electrical discontinuities longer than 1ms, MIL-STD 202, Method 213, Condition "C"
- Connectors show no damage when exposed to most fluids used in industrial applications
- 1000MΩ minimum at +25°C insulation resistance
- Moisture resistance - properly wired and mated connections will withstand immersion under three feet of water without loss of electronic qualities or leakage
- >2mA current leakge at 1500VAC dielectric withstanding voltage
- Thermal cycle - no cracking, chipping, or leaking after 20 test cycles from -55°C to +125°C
Dimensions
Videos
Related Products
TE Connectivity / DEUTSCH DT Family Connectors
Environmentally-sealed connectors designed for cable to cable applications.
TE Connectivity / DEUTSCH DTM EEC Headers
250VDC maximum voltage, 7.5A current rating, and -55°C to +125°C operating temperature range.
TE Connectivity Industrial & Commercial Transportation
Products to protect electrical systems in heavy equipment from a variety of contaminants.