All Results (1.865)

SparkFun Accessories Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on either end. They have the flexibility of stranded wire but will fit directly into breadboards and female pin headers. The only downside to the standa

SparkFun Accessories Do you have an R/C vehicle battery pack that desperately needs a Deans connector? With our new M/F Deans connector pair you'll have just what you need to safely and securely connect your battery or anything else that requires a mini T Plug.Each pack

SparkFun Accessories This is the SparkFun Solderable Breadboard. A bare PCB that is the exact size as our regular breadboard with the same connections to pins and power rails. This board is especially useful for preserving a prototype or experiment you just created on a

SparkFun Accessories Description: This is your tried and true full size solderless breadboard! It has 2 split power buses 10 columns and 63 rows - with a total of 830 tie in points. All pins are spaced by a standard 0.1". The two sets of five columns are separated by a

SparkFun Accessories Solder-able Breadboard Large

SparkFun Accessories Snappable Protoboard Protoboard

SparkFun Accessories Teensy Header Kit

SparkFun Accessories ESP32 Thing Stackable Header Set

SparkFun Accessories This is a super small 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other and can be cut down to smaller increments if the need arises.

SparkFun Accessories This header kit is designed specifically for the larger Teensy 4.1 Teensy 3.6 and Teensy 3.5 development boards offering "stackable" headers with extra-long female pins. When soldered to your Teensy these headers make the board fully compatible w

SparkFun Accessories This is a simple and easy to use battery box for powering the micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST Connector.

SparkFun Accessories Here for all your mechatronic needs is a simple high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min.A standard 3-pin power and control cable is attach