All Results (1.593)

Select Image Part # Mfr. Description Datasheet Availability Pricing (EUR) Filter the results in the table by unit price based on your quantity. Qty. RoHS
Marki Microwave RF Development Tools The EVB-MM1A-0832HP is a connectorized evaluation board for the MM1A-0832HPSM passive MMIC Surface mount 8 - 32 GHz Double Balanced Mixer with LO Amplifier. 1In Stock
514,28 €
Min.: 1
Mult.: 1
Max.: 5
Marki Microwave Signal Conditioning The MBAL-0104SM is a GaAs passive MMIC balun in a 4mm QFN surface mount package. It features excellent amplitude and phase balance across its 1 to 4 GHz frequency range that offers a 1:2 impedance ratio. 23In Stock
55,32 €
46,10 €
Min.: 1
Mult.: 1
Marki Microwave RF Mixer The MM1-0320HSM is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. 7In Stock
100Expected 12/14/2026
76,53 €
63,78 €
Min.: 1
Mult.: 1
Marki Microwave RF Amplifier A high-linearity low noise amplifier capable of providing 15.5 dB gain, 2 dB noise figure and +26 dBm OIP3 up to 10 GHz. The amplifier is suitable for use in RF front-ends requiring low noise, high gain and excellent signal fidelity. 3In Stock
21,80 €
19,83 €
Min.: 1
Mult.: 1
Marki Microwave RF Development Tools EVAL-MMIQ-0416L is a connectorized evaluation board for the MMIQ-0416LSM-2 Low LO Drive MMIC surface mount 4 - 16 GHz IQ Mixer. 1In Stock
892,05 €
Min.: 1
Mult.: 1
Max.: 5
Marki Microwave RF Development Tools The EVAL-MT3L-0113H is a connectorized evaluation board for the MT3L-0113HM passive MMIC Surface mount 1.5 - 13 GHz High Dynamic Range Mixer. 1In Stock
667,64 €
Min.: 1
Mult.: 1
Max.: 5
Marki Microwave RF Development Tools The EVAL-NLTL-6794 is a connectorized evaluation board for the NLTL-6794SM is a MMIC 0.1-1 GHz non-linear transmission line (NLTL) based comb generator. 1In Stock
779,84 €
Min.: 1
Mult.: 1
Max.: 5
Marki Microwave MM1-0320LBH
Marki Microwave Marki Microwave 1In Stock
661,19 €
Min.: 1
Mult.: 1
Marki Microwave Signal Conditioning The ADM1-0026PA is a complete LO driver solution for use with all Marki mixers up to 26.5 GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry. 1In Stock
2Expected 1/29/2027
1.118,85 €
Min.: 1
Mult.: 1
Marki Microwave Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth. 7In Stock
20Expected 12/14/2026
209,90 €
179,91 €
Min.: 1
Mult.: 1
Marki Microwave Signal Conditioning This general purpose high pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during up-conversion or for removing spurious interference and noise. 1In Stock
1.118,85 €
Min.: 1
Mult.: 1
Marki Microwave Signal Conditioning MM1-1044H is a GaAs MMIC double balanced mixer that is designed for and operates at the K and Ka band 5G frequencies. MM1-1044H is a high linearity Ka band mixer that works well as both an up and down converter. 1In Stock
978,11 €
Min.: 1
Mult.: 1
Marki Microwave Signal Conditioning 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications. 1In Stock
670,18 €
Min.: 1
Mult.: 1
Marki Microwave Signal Conditioning 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications. Non-Stocked Lead-Time 18 Weeks
828,33 €
Min.: 1
Mult.: 1
Marki Microwave Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference and noise. 2In Stock
399,14 €
Min.: 1
Mult.: 1
No
Marki Microwave Equalisers A passive MMIC equalizer CSP ideal for compensating for low pass filtering effects in RF/microwave and high speed digital systems. The MEQ3-20CSP1 provides 2.5dB positive slope equalization from DC to 20GHz with a DC attenuation of 3dB. 500In Stock
27,40 €
27,39 €
26,72 €
Min.: 1
Mult.: 1
Marki Microwave RF Amplifier A low-cost, cascadable broadband InGaP HBT amplifier. This is a general-purpose gain block amplifier which provides high P1dB, high OIP3, and a very small form factor. 40In Stock
50,08 €
41,74 €
Min.: 1
Mult.: 1
Marki Microwave Signal Conditioning The HLM-70CSP2 is a high-linearity GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 70GHz bandwidth. It offers low insertion loss and excellent return loss over a wide operating bandwidth. 54In Stock
128,80 €
107,33 €
Min.: 1
Mult.: 1
Marki Microwave Signal Conditioning The MPD-0R402SCSP2 is a small footprint MMIC 0.4-2.5 GHz 2-Way power divider/power splitter featuring high 20 dB isolation and low 1 dB insertion loss in our compact CSP2 chip scale package. 92In Stock
38,12 €
31,77 €
Min.: 1
Mult.: 1
Marki Microwave EVB-MPD4-0218
Marki Microwave RF Development Tools The EVB-MPD4-0218 is a connectorized evaluation board for the MPD4-0218CSP3 MMIC 2-18 GHz 4-Way power divider/power splitter. 4In Stock
514,28 €
Min.: 1
Mult.: 1
Max.: 5
Marki Microwave Equalisers A passive MMIC equalizer CSP ideal for compensating for low pass filtering effects in RF/microwave and high speed digital systems. The MEQ9-20CSP1 provides 8.5dB positive slope equalization from DC to 20GHz with a DC attenuation of 9dB. 23In Stock
500Expected 12/9/2026
27,40 €
27,39 €
26,72 €
Min.: 1
Mult.: 1
Marki Microwave Signal Conditioning The MBAL-0220SM is a GaAs passive MMIC balun in a 4mm QFN surface mount package. Its frequency ranges from 2 to 20 GHz and offers a 1:2 impedance ratio. 25In Stock
276,59 €
230,48 €
Min.: 1
Mult.: 1
Marki Microwave Equalisers The MEQ10-45CSP1 is a passive MMIC equalizer CSP ideal for compensating for low pass filtering effects in RF/microwave and high speed digital systems. The MEQ10-45CSP1 provides positive slope from DC to 45GHz with a DC attenuation of 10dB. 225In Stock
1.000Expected 4/16/2027
40,59 €
33,82 €
Min.: 1
Mult.: 1
Marki Microwave RF Mixer MMIQ-1040LSM is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 10 to 40 GHz on the RF and LO ports with an IF from DC to 10 GHz. 25In Stock
321,64 €
268,03 €
Min.: 1
Mult.: 1
Marki Microwave RF Amplifier The ADM2-0035PA is an LO driver amplifier module with 2 internally connected wideband gain stages and equalization. It is designed to provide sufficient gain and output power for Marki S-diode mixers below 35 GHz with an input power of 0-5 dBm. 3In Stock
1.681,79 €
Min.: 1
Mult.: 1