Signal Conditioning The C20-0R520 is a broadband 0.5-20 GHz, 20 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
C20-0R520
Marki Microwave
1:
1.090,70 €
2 In Stock
New At Mouser
Mouser Part No
10-C20-0R520
New At Mouser
Marki Microwave
Signal Conditioning The C20-0R520 is a broadband 0.5-20 GHz, 20 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
2 In Stock
Buy
Min.: 1
Mult.: 1
Details
Signal Conditioning The PBR-0003 is a 300 kHz to 3 GHz high isolation power combiner. This power combiner features a unique hand tuned construction based on a bridge coupler that enables 45 dB typical isolation across the operational bandwidth.
PBR-0003
Marki Microwave
1:
837,38 €
3 In Stock
New At Mouser
Mouser Part No
10-PBR-0003
New At Mouser
Marki Microwave
Signal Conditioning The PBR-0003 is a 300 kHz to 3 GHz high isolation power combiner. This power combiner features a unique hand tuned construction based on a bridge coupler that enables 45 dB typical isolation across the operational bandwidth.
3 In Stock
Buy
Min.: 1
Mult.: 1
Details
Signal Conditioning A broadband MMIC LO buffer amplifier that efficiently provides high gain and output power over a 20-55 GHz frequency band. It is designed to provide a strong, flat output power response when driven with an input power at 0 dBm.
AMM-6702UC
Marki Microwave
1:
1.336,97 €
2 In Stock
New At Mouser
Mouser Part No
10-AMM-6702UC
New At Mouser
Marki Microwave
Signal Conditioning A broadband MMIC LO buffer amplifier that efficiently provides high gain and output power over a 20-55 GHz frequency band. It is designed to provide a strong, flat output power response when driven with an input power at 0 dBm.
2 In Stock
Buy
Min.: 1
Mult.: 1
Details
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
BALH-0006SMG
Marki Microwave
1:
213,77 €
8 In Stock
10 Expected 12/11/2026
New At Mouser
Mouser Part No
10-BALH-0006SMG
New At Mouser
Marki Microwave
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
8 In Stock
10 Expected 12/11/2026
Buy
Min.: 1
Mult.: 1
Details
Signal Conditioning A high power type N-connectorized bidirectional coupler capable of operation to 18 GHz. This coupler features a unique air-line construction that simultaneously enables extremely low loss and high directivity.
CA-18
Marki Microwave
1:
1.386,24 €
3 In Stock
New At Mouser
Mouser Part No
10-CA-18
New At Mouser
Marki Microwave
Signal Conditioning A high power type N-connectorized bidirectional coupler capable of operation to 18 GHz. This coupler features a unique air-line construction that simultaneously enables extremely low loss and high directivity.
3 In Stock
Buy
Min.: 1
Mult.: 1
Details
Signal Conditioning The CBR17-0026 offers the broadest bandwidth of any standalone bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
CBR17-0026
Marki Microwave
1:
2.673,95 €
2 In Stock
New At Mouser
Mouser Part No
10-CBR17-0026
New At Mouser
Marki Microwave
Signal Conditioning The CBR17-0026 offers the broadest bandwidth of any standalone bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
2 In Stock
Buy
Min.: 1
Mult.: 1
Details
Signal Conditioning The AQA-2156 is an amplified frequency multiplier that quadruples the 5.25 14 GHz input frequency, producing an amplified 21 - 56 GHz quadrupled output frequency.
AQA-2156
Marki Microwave
1:
2.666,92 €
1 In Stock
New At Mouser
Mouser Part No
10-AQA-2156
New At Mouser
Marki Microwave
Signal Conditioning The AQA-2156 is an amplified frequency multiplier that quadruples the 5.25 14 GHz input frequency, producing an amplified 21 - 56 GHz quadrupled output frequency.
1 In Stock
Buy
Min.: 1
Mult.: 1
Details
Signal Conditioning The BT-0026SMG is a packaged bias tee featuring excellent insertion loss and superior isolations over a broad 20 MHz to 26 GHz bandwidth.
BT-0026SMG-1
Marki Microwave
1:
177,12 €
10 In Stock
New At Mouser
Mouser Part No
10-BT-0026SMG-1
New At Mouser
Marki Microwave
Signal Conditioning The BT-0026SMG is a packaged bias tee featuring excellent insertion loss and superior isolations over a broad 20 MHz to 26 GHz bandwidth.
10 In Stock
Buy
Min.: 1
Mult.: 1
Details
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 10 MHz to 20 GHz bandwidth.
BAL-0020SLG
Marki Microwave
1:
403,32 €
5 In Stock
60 On Order
New At Mouser
Mouser Part No
10-BAL-0020SLG
New At Mouser
Marki Microwave
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 10 MHz to 20 GHz bandwidth.
5 In Stock
60 On Order
View Dates
Stock:
5 Can Dispatch Immediately
On Order:
20 Expected 1/8/2027
40 Expected 1/11/2027
Factory Lead Time:
14 Weeks
Buy
Min.: 1
Mult.: 1
Details
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
BALH-0009SMG
Marki Microwave
1:
272,38 €
24 In Stock
10 Expected 2/23/2027
New At Mouser
Mouser Part No
10-BALH-0009SMG
New At Mouser
Marki Microwave
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
24 In Stock
10 Expected 2/23/2027
Buy
Min.: 1
Mult.: 1
Details
RF Development Tools The EVB-MPD-0422F is a connectorized evaluation board for the MPD-0422FCSP2 MMIC 4-22GHz 2-Way power divider/power splitter.
Marki Microwave EVB-MPD-0422F
EVB-MPD-0422F
Marki Microwave
1:
467,53 €
2 In Stock
New At Mouser
Mouser Part No
10-EVB-MPD-0422F
New At Mouser
Marki Microwave
RF Development Tools The EVB-MPD-0422F is a connectorized evaluation board for the MPD-0422FCSP2 MMIC 4-22GHz 2-Way power divider/power splitter.
2 In Stock
Buy
Min.: 1
Mult.: 1
Max.: 5
Details
RF Development Tools The HLM-70CSP2 is a high-linearity GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 70GHz bandwidth. It offers low insertion loss and excellent return loss over a wide operating bandwidth.
Marki Microwave EVB-HLM-70CSP2
EVB-HLM-70CSP2
Marki Microwave
1:
618,18 €
1 In Stock
New At Mouser
Mouser Part No
10-EVB-HLM-70CSP2
New At Mouser
Marki Microwave
RF Development Tools The HLM-70CSP2 is a high-linearity GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 70GHz bandwidth. It offers low insertion loss and excellent return loss over a wide operating bandwidth.
1 In Stock
Buy
Min.: 1
Mult.: 1
Max.: 5
Details
RF Amplifier The APM-6849SM is a single stage broadband, low phase noise pre-amplifier designed to provide 11 dB typical gain packaged in a 3 mm QFN with low current consumption.
APM-6849SM
Marki Microwave
1:
153,77 €
9 In Stock
New At Mouser
Mouser Part No
10-APM-6849SM
New At Mouser
Marki Microwave
RF Amplifier The APM-6849SM is a single stage broadband, low phase noise pre-amplifier designed to provide 11 dB typical gain packaged in a 3 mm QFN with low current consumption.
9 In Stock
Buy
Min.: 1
Mult.: 1
Details
RF Development Tools The EVAL-MMIQ-0218L is a connectorized evaluation board for the MMIQ-0218LSM-2 Low LO Drive MMIC surface mount 2 - 18 GHz IQ Mixer.
EVAL-MMIQ-0218L
Marki Microwave
1:
1.116,47 €
1 In Stock
New At Mouser
Mouser Part No
10-EVAL-MMIQ-0218L
New At Mouser
Marki Microwave
RF Development Tools The EVAL-MMIQ-0218L is a connectorized evaluation board for the MMIQ-0218LSM-2 Low LO Drive MMIC surface mount 2 - 18 GHz IQ Mixer.
1 In Stock
Buy
Min.: 1
Mult.: 1
Max.: 5
Details
Equalisers The MEQ7-20ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 20GHz with DC attenuation options between 0 and 11dB.
MEQ7-20ASM
Marki Microwave
1:
38,37 €
25 In Stock
New At Mouser
Mouser Part No
10-MEQ7-20ASM
New At Mouser
Marki Microwave
Equalisers The MEQ7-20ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 20GHz with DC attenuation options between 0 and 11dB.
25 In Stock
Buy
Min.: 1
Mult.: 1
Details
RF Mixer The MM2-0530HSM is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530HSM is 4x4 mm QFN packaged.
MM2-0530HSM-2
Marki Microwave
1:
255,05 €
7 In Stock
100 Expected 2/19/2027
New At Mouser
Mouser Part No
10-MM2-0530HSM-2
New At Mouser
Marki Microwave
RF Mixer The MM2-0530HSM is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530HSM is 4x4 mm QFN packaged.
7 In Stock
100 Expected 2/19/2027
Buy
Min.: 1
Mult.: 1
Details
RF Development Tools The EVAL-DLM-10 is a connectorized evaluation board for the DLM-10SM is a tunable, dual channel GaAs Schottky diode signal limiter featuring excellent IP3, insertion loss, and return loss.
EVAL-DLM-10
Marki Microwave
1:
335,50 €
1 In Stock
New At Mouser
Mouser Part No
10-EVAL-DLM-10
New At Mouser
Marki Microwave
RF Development Tools The EVAL-DLM-10 is a connectorized evaluation board for the DLM-10SM is a tunable, dual channel GaAs Schottky diode signal limiter featuring excellent IP3, insertion loss, and return loss.
1 In Stock
Buy
Min.: 1
Mult.: 1
Max.: 5
Details
RF Amplifier A high-linearity low noise amplifier capable of providing +20 dBm output power up to 10 GHz. The ADM-8095PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
ADM-8095PSM
Marki Microwave
1:
31,39 €
12 In Stock
98 Expected 12/1/2026
New At Mouser
Mouser Part No
10-ADM-8095PSM
New At Mouser
Marki Microwave
RF Amplifier A high-linearity low noise amplifier capable of providing +20 dBm output power up to 10 GHz. The ADM-8095PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
12 In Stock
98 Expected 12/1/2026
Buy
Min.: 1
Mult.: 1
Details
RF Amplifier A high-linearity low noise amplifier capable of providing +23 dBm output power up to 6 GHz. The ADM-8096PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
ADM-8096PSM
Marki Microwave
1:
24,03 €
28 In Stock
New At Mouser
Mouser Part No
10-ADM-8096PSM
New At Mouser
Marki Microwave
RF Amplifier A high-linearity low noise amplifier capable of providing +23 dBm output power up to 6 GHz. The ADM-8096PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
28 In Stock
Buy
Min.: 1
Mult.: 1
Details
RF Development Tools The EVAL-HLM-20P is a connectorized evaluation board for the HLM-20PSM DC-40 GHz surface mount amplifier.
EVAL-HLM-20P
Marki Microwave
1:
368,21 €
2 In Stock
New At Mouser
Mouser Part No
10-EVAL-HLM-20P
New At Mouser
Marki Microwave
RF Development Tools The EVAL-HLM-20P is a connectorized evaluation board for the HLM-20PSM DC-40 GHz surface mount amplifier.
2 In Stock
Buy
Min.: 1
Mult.: 1
Max.: 5
Details
RF Development Tools The EVB-MM1A-0832HP is a connectorized evaluation board for the MM1A-0832HPSM passive MMIC Surface mount 8 - 32 GHz Double Balanced Mixer with LO Amplifier.
EVB-MM1A-0832HP
Marki Microwave
1:
514,28 €
1 In Stock
New At Mouser
Mouser Part No
10-EVB-MM1A-0832HP
New At Mouser
Marki Microwave
RF Development Tools The EVB-MM1A-0832HP is a connectorized evaluation board for the MM1A-0832HPSM passive MMIC Surface mount 8 - 32 GHz Double Balanced Mixer with LO Amplifier.
1 In Stock
Buy
Min.: 1
Mult.: 1
Max.: 5
Details
Signal Conditioning The MBAL-0104SM is a GaAs passive MMIC balun in a 4mm QFN surface mount package. It features excellent amplitude and phase balance across its 1 to 4 GHz frequency range that offers a 1:2 impedance ratio.
MBAL-0104SM
Marki Microwave
1:
55,32 €
23 In Stock
New At Mouser
Mouser Part No
10-MBAL-0104SM
New At Mouser
Marki Microwave
Signal Conditioning The MBAL-0104SM is a GaAs passive MMIC balun in a 4mm QFN surface mount package. It features excellent amplitude and phase balance across its 1 to 4 GHz frequency range that offers a 1:2 impedance ratio.
23 In Stock
Buy
Min.: 1
Mult.: 1
Details
RF Mixer The MM1-0320HSM is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications.
MM1-0320HSM-2
Marki Microwave
1:
76,53 €
7 In Stock
100 Expected 12/14/2026
New At Mouser
Mouser Part No
10-MM1-0320HSM-2
New At Mouser
Marki Microwave
RF Mixer The MM1-0320HSM is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications.
7 In Stock
100 Expected 12/14/2026
Buy
Min.: 1
Mult.: 1
Details
Attenuators The ATN06-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN06-0070CSP1 features a typical 6.0 dB attenuation with 0.2 dB attenuation flatness and 22 dB return loss across the operational bandwidth.
ATN06-0070CSP1
Marki Microwave
1:
19,06 €
1 In Stock
335 Expected 12/9/2026
New At Mouser
Mouser Part No
10-ATN06-0070CSP1
New At Mouser
Marki Microwave
Attenuators The ATN06-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN06-0070CSP1 features a typical 6.0 dB attenuation with 0.2 dB attenuation flatness and 22 dB return loss across the operational bandwidth.
1 In Stock
335 Expected 12/9/2026
Buy
Min.: 1
Mult.: 1
Details
RF Amplifier A high-linearity low noise amplifier capable of providing 15.5 dB gain, 2 dB noise figure and +26 dBm OIP3 up to 10 GHz. The amplifier is suitable for use in RF front-ends requiring low noise, high gain and excellent signal fidelity.
ADM-8622PSM
Marki Microwave
1:
21,80 €
3 In Stock
New At Mouser
Mouser Part No
10-ADM-8622PSM
New At Mouser
Marki Microwave
RF Amplifier A high-linearity low noise amplifier capable of providing 15.5 dB gain, 2 dB noise figure and +26 dBm OIP3 up to 10 GHz. The amplifier is suitable for use in RF front-ends requiring low noise, high gain and excellent signal fidelity.
3 In Stock
Buy
Min.: 1
Mult.: 1
Details