All Results (1.941)

Filters

Availability options
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (EUR) Filter the results in the table by unit price based on your quantity.
Qty. RoHS
SparkFun Interface Development Tools SparkFun Pro Micro - RP2040
42Expected 10/22/2026
Min.: 1
Mult.: 1
SparkFun Multiple Function Sensor Development Tools The MyoWare® 2.0 Muscle Sensor is designed to be wearable allowing you to attach biomedical sensor pads directly to the board itself. However there still may be cases where you want to mount the sensor pads away from the board; this is where th 35In Stock
Min.: 1
Mult.: 1

SparkFun Multiple Function Sensor Development Tools The MyoWare 2.0 Link Shield is designed to easily connect a MyoWare 2.0 Muscle Sensor to your Arduino microcontroller. The shield provides a 3.5mm TRS jack so that you can use a 3.5mm TRS-to-TRS cable to link the boards together. The MyoWare 2.0 Li 12In Stock
72Expected 10/14/2026
Min.: 1
Mult.: 1

SparkFun Multiple Function Sensor Development Tools The MyoWare 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would need to do is stack it on your 4In Stock
4Expected 9/25/2026
Min.: 1
Mult.: 1

SparkFun Development Boards & Kits - ARM Meet the Teensy 4.1 without Ethernet (Headers) a streamlined high-performance development board that's ready to use out of the box. This version takes the record-breaking 600MHz speed and expands it for large-scale projects with pre-soldered heade
More Info Available

SparkFun Interface Development Tools The SparkFun USB-C Host Shield contains all of the digital logic and analog circuitry necessary to implement a USB peripheral/host controller with your Arduino. This means you could use your Arduino to interface with and control any USB 2.0 compatibl 2In Stock
Min.: 1
Mult.: 1
SparkFun GNSS / GPS Development Tools The SparkFun NEO-M9N GPS Breakout with on-board chip antenna is a high quality GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver meaning it can receive signals from the GPS GL
Datasheet
12In Stock
29Expected 10/1/2026
Min.: 1
Mult.: 1
SparkFun Educational Kits If you do anything with electronics you re probably already using transistors but you re probably using them in large prepackaged clusters of just one type. The SparkFun Discrete Semiconductor Kit addresses your needs of only needing one or a 3In Stock
Min.: 1
Mult.: 1
SparkFun Educational Kits LilyPad Sewable Electronics Kit 4In Stock
2On Order
Min.: 1
Mult.: 1


SparkFun Educational Kits The great thing about open source is that while SparkFun has designed our own MicroMod carrier boards that does not stop you from creating your very own MicroMod carrier board. The MicroMod DIY Carrier Kit includes five M.2 connectors (4.2mm height) 10In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Welcome to the world of electronics and programming! The SparkFun Inventor's Kit (SIK) is our flagship all-in-one kit designed to guide you from your very first line of code to building a fully autonomous robot. This is the premier starting point fo 7In Stock
Min.: 1
Mult.: 1

SparkFun Display Development Tools Micro OLED Breakout OLED Breakout 25In Stock
Min.: 1
Mult.: 1

SparkFun Display Development Tools This compact OLED display packs a powerful punch transforming your creation with a crisp high-contrast 128x32 pixel canvas. Measuring just 0.91 inches this tiny display seamlessly integrates into your design while its low power draw ensures your 1In Stock
Min.: 1
Mult.: 1
SparkFun Daughter Cards & OEM Boards RS232 Shifter - SMD Shifter - SMD
Datasheet
40In Stock
50Expected 11/10/2026
Min.: 1
Mult.: 1

SparkFun Test Plugs & Test Jacks This is a red insulated binding post. These binding posts do accept banana plugs and are a great way to connect single-wire leads. The colored cap screws up and down and is designed to clamp on the connecting wire.These binding posts are sold indiv 203In Stock
Min.: 1
Mult.: 1
SparkFun Test Plugs & Test Jacks This is a black insulated binding post. These binding posts do accept banana plugs and are a great way to connect single-wire leads. The colored cap screws up and down and is designed to clamp on the connecting wire.These binding posts are sold ind 453In Stock
Min.: 1
Mult.: 1
SparkFun Power Management IC Development Tools The LiPower board is based on the incredibly versatile TPS61200 boost converter. The board is configured to be used with a LiPo battery has solder jumper selectable 5V and 3.3V output and an under voltage protection of 2.6V. However the board can
Datasheet
18In Stock
Min.: 1
Mult.: 1

SparkFun Daughter Cards & OEM Boards MOSFET Power Controller
Datasheet
39In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is a very handy magnetic mount for survey grade GNSS/GPS antennas. Sturdy compact and surprisingly strong this is a quick way of mounting your antenna to metal roofs parapets and other ferrous materials. The rod is threaded 5/8" 11-TPI (thr 27In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi Google Coral and NVIDIA Jetson. You can also solder it to Pi HATs that do not have headers on the boa 109In Stock
Min.: 1
Mult.: 1
SparkFun Optical Sensor Development Tools This version of the QRE1113 breakout board features a digital output using a capacitor discharge circuit to measure the amount of reflection. This tiny board is perfect for line sensing when only digital I/O is available and can be used in both 3.3
Datasheet
34In Stock
Min.: 1
Mult.: 1

SparkFun Solenoids & Actuators Solenoids are a great way to induce linear motion for pushing pulling or controlling switches and levers. According to the datasheet this solenoid is rated for 36V but they work like a charm at 12V. We've been controlling them with the Arduino Power
Datasheet
20In Stock
Min.: 1
Mult.: 1
SparkFun Stepper Motors When you need exact positioning and repeatability rather than just raw speed a DC motor won't cut it; you need a stepper. This Small Stepper Motor is the perfect solution for small-scale robotics gauges dials and camera mechanisms.Unlike standard
Datasheet
20In Stock
Min.: 1
Mult.: 1


SparkFun Solenoids & Actuators Solenoid, 5V, 2-pin JST PH Connector
Datasheet
182In Stock
290Expected 10/14/2026
Min.: 1
Mult.: 1
SparkFun Power Management IC Development Tools EasyDriver - Stepper Motor Driver
Datasheet
21In Stock
Min.: 1
Mult.: 1