SparkFun Accessories Break Away Headers - Straight

SparkFun Accessories Coin Cell Battery Holder - 20mm (PTH)

SparkFun Accessories This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Digi. This is the SMD version that we are currently using on our shields and breakout boards.Note:** **This item is sold as each not in pairs.

SparkFun Accessories This is your basic spool of lead free solder with a water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder. If you are just beginning to solde

SparkFun Accessories This is a PCB edge mount SMA RF connector. These connectors are perfect for prototyping with the GPS and Cellular devices that require an antenna connection. Each connector is equipped with a female signal pin and will correctly mate with the origin

Multilayer Ceramic Capacitors MLCC - SMD/SMT This is a general-purpose 0.1 F (100nF) multilayer ceramic capacitor (MLCC) in a standard 0603 package. It is rated for 25V and features a Y5V dielectric offering high capacitance density for bypass and decoupling applications where temperature sta

Interface Development Tools SparkFun FTDI Starter Kit - 3.3V

Specialised Cables Three pin JST connector with red black and yellow colors. 5 inch wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp sensors. Quick and easy this cable will save you 15-20 minutes over making your own

SparkFun Accessories USB-C is quickly becoming more and more prominent in the maker community because let s be honest who likes trying three times to insert USB into a port? This is a 16-pin female USB Type C connector that is commonly found in smart phones laptop

Development Boards & Kits - ARM Raspberry Pi Pico 2 is a new $5 microcontroller board from Raspberry Pi. It's built on the RP2350: a new high-performance secure microcontroller also from Raspberry Pi. The RP2350 features a higher core clock speed double the on-chip SRAM double

SparkFun Accessories This ANT500 is a telescopic antenna designed for operation from 75 MHz to 1 GHz with a total length that is configurable from 20 cm to 88 cm long. Each ANT500 is constructed of stainless steel and features an SMA male connector rotating shaft and a

SparkFun Accessories It's your basic black action button! This is a very useful small panel-mount momentary switch. It is a SPST N.O. with the threaded portion being 6.75mm in diameter. This button is perfect for basic On/Off functions. Overall length (including leads)