SparkFun Accessories With the SparkFun Qwiic Connect System expanding every day we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Gravity Adapter Cable allows interoperabili

SparkFun Accessories This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to

SparkFun Accessories This is a very common 0.1uF capacitor. Used on all sorts of applications to decouple ICs from power supplies. 0.1" spaced leads make this a perfect candidate for breadboarding and perf boarding. Rated at 50V.

SparkFun Accessories There are lots of trimpots out there. Some are very large some so small they require a screwdriver. Here at SparkFun we just needed a simple one that worked. This 10K trimmable potentiometer has a small knob built right in and it's breadboard frien

SparkFun Accessories Tactile Button Assortment

SparkFun Accessories Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:Forward Voltage (R/G/B): 2.0 / 3.2 / 3.1VForward Current: 20mAIntensity (R/G/B): 550 / 250 / 700 mcdCommon CathodeDocuments:D

SparkFun Accessories Heating Pad - 5x15cm

SparkFun Accessories 7-Segment Serial Display - Blue

SparkFun Accessories This inline switch is great when you just want a simple on/off toggle switch that's already enclosed. Inside is a simple rocker switch with solder terminals with crimp strain relief. Attach some wires solder them in place and press-fit the enclosur

SparkFun Accessories This Magnetic Door Switch Set is a small reed switch assembly that alerts you when doors drawers or other openings open. These types of switches are primarily used in home security systems. One half of the assembly mounts on a window or door frame

SparkFun Accessories You don't have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 red 5mm LEDs will help alleviate any frustrations you've had with accidentally burning them out by having a resistor in the diode it

SparkFun Accessories LilyPad Button Board