SparkFun Accessories SOIC to DIP Adapter - 28-Pin
BOB-00496
SparkFun
1:
5,12 €
8 In Stock
Mouser Part No
474-BOB-00496
SparkFun
SparkFun Accessories SOIC to DIP Adapter - 28-Pin
8 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories 8-Pin SSOP to DIP break out board. The footprint was rotated to accommodate different width SSOP devices and can be used with 8 pin SSOPs. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to 0.6
BOB-00497
SparkFun
1:
3,40 €
24 In Stock
Mouser Part No
474-BOB-00497
SparkFun
SparkFun Accessories 8-Pin SSOP to DIP break out board. The footprint was rotated to accommodate different width SSOP devices and can be used with 8 pin SSOPs. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to 0.6
24 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories SSOP to DIP Adapter - 28-Pin
BOB-00500
SparkFun
1:
4,52 €
6 In Stock
Mouser Part No
474-BOB-00500
SparkFun
SparkFun Accessories SSOP to DIP Adapter - 28-Pin
6 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories RJ45 Breakout
BOB-00716
SparkFun
1:
1,29 €
324 In Stock
Mouser Part No
474-BOB-00716
SparkFun
SparkFun Accessories RJ45 Breakout
324 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories Breakout Board for XBee Module
BOB-08276
SparkFun
1:
3,23 €
98 In Stock
Mouser Part No
474-BOB-08276
SparkFun
SparkFun Accessories Breakout Board for XBee Module
98 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories Thumb Joystick Breakout
BOB-09110
SparkFun
1:
2,37 €
44 In Stock
Mouser Part No
474-BOB-09110
SparkFun
SparkFun Accessories Thumb Joystick Breakout
44 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories This simple breakout board makes it easy to use our LED tactile switches in a breadboard or your next project.Note: Populate the board according to the polarity of the LED on the switch. The markings for the switch are irrelevant and can be reversed
BOB-10467
SparkFun
1:
1,94 €
13 In Stock
Mouser Part No
474-BOB-10467
SparkFun
SparkFun Accessories This simple breakout board makes it easy to use our LED tactile switches in a breadboard or your next project.Note: Populate the board according to the polarity of the LED on the switch. The markings for the switch are irrelevant and can be reversed
13 In Stock
Buy
Min.: 1
Mult.: 1
SparkFun Accessories Load Sensor Combinator Ver. 1.1
BOB-13878
SparkFun
1:
2,37 €
27 In Stock
Mouser Part No
474-BOB-13878
SparkFun
SparkFun Accessories Load Sensor Combinator Ver. 1.1
27 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories Multiplexer Breakout -8 Channel
BOB-13906
SparkFun
1:
3,01 €
61 In Stock
35 Expected 10/27/2026
Mouser Part No
474-BOB-13906
SparkFun
SparkFun Accessories Multiplexer Breakout -8 Channel
61 In Stock
35 Expected 10/27/2026
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories SSOP to DIP Adapter 16-pin
BOB-13994
SparkFun
1:
3,66 €
54 In Stock
Mouser Part No
474-BOB-13994
SparkFun
SparkFun Accessories SSOP to DIP Adapter 16-pin
54 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories RJ11 Breakout Breakout
BOB-14021
SparkFun
1:
2,37 €
69 In Stock
Mouser Part No
474-BOB-14021
SparkFun
SparkFun Accessories RJ11 Breakout Breakout
69 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an
BOB-16842
SparkFun
1:
4,91 €
3 In Stock
35 Expected 8/28/2026
Mouser Part No
474-BOB-16842
SparkFun
SparkFun Accessories Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an
3 In Stock
35 Expected 8/28/2026
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories This is an interface cable for the Bus Pirate designed to connect to its 2x5 I/O header. The cable's connector is composed of two rows of five 0.1" spaced pins; it's also polarized as is the mating connector on-board the Bus Pirate so you can only
CAB-09556
SparkFun
1:
4,95 €
37 In Stock
Mouser Part No
474-CAB-09556
SparkFun
SparkFun Accessories This is an interface cable for the Bus Pirate designed to connect to its 2x5 I/O header. The cable's connector is composed of two rows of five 0.1" spaced pins; it's also polarized as is the mating connector on-board the Bus Pirate so you can only
37 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories IC Hook with Pigtail
CAB-09741
SparkFun
1:
4,95 €
92 In Stock
Mouser Part No
474-CAB-09741
SparkFun
SparkFun Accessories IC Hook with Pigtail
92 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.This is a 15ft. length of 6-wire ribbon cable. Check the
CAB-10646
SparkFun
1:
3,87 €
8 In Stock
Mouser Part No
474-CAB-10646
SparkFun
SparkFun Accessories Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.This is a 15ft. length of 6-wire ribbon cable. Check the
8 In Stock
Buy
Min.: 1
Mult.: 1
SparkFun Accessories This is your simple three conductor sensor cable with electrode pad leads. These cables are 24" long and feature a 3.5mm audio jack connector on one end with snap style receptacles for biomedical sensor pads. Each cable comes in a red/blue/black set.
CAB-12970
SparkFun
1:
8,58 €
18 In Stock
Mouser Part No
474-CAB-12970
SparkFun
SparkFun Accessories This is your simple three conductor sensor cable with electrode pad leads. These cables are 24" long and feature a 3.5mm audio jack connector on one end with snap style receptacles for biomedical sensor pads. Each cable comes in a red/blue/black set.
18 In Stock
Buy
Min.: 1
Mult.: 1
SparkFun Accessories Alligator Clip with Pigtail 4 Pack
CAB-13191
SparkFun
1:
4,15 €
16 In Stock
Mouser Part No
474-CAB-13191
SparkFun
SparkFun Accessories Alligator Clip with Pigtail 4 Pack
16 In Stock
Buy
Min.: 1
Mult.: 1
SparkFun Accessories USB OTG Cable- Fem. A to Micro B - 5in
CAB-14276
SparkFun
1:
3,40 €
6 In Stock Restricted Availability
Mouser Part No
474-CAB-14276
SparkFun
SparkFun Accessories USB OTG Cable- Fem. A to Micro B - 5in
6 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories This is a 5-pin JST-ZHR cable that's terminated with breadboard breadboard compatible male pins. It's the same cable that comes with our SPS30 Particulate Matter Sensor and is a great spare if you need one or if you happen to need to connect to a dev
CAB-15108
SparkFun
1:
3,66 €
179 In Stock
Mouser Part No
474-CAB-15108
SparkFun
SparkFun Accessories This is a 5-pin JST-ZHR cable that's terminated with breadboard breadboard compatible male pins. It's the same cable that comes with our SPS30 Particulate Matter Sensor and is a great spare if you need one or if you happen to need to connect to a dev
179 In Stock
Buy
Min.: 1
Mult.: 1
SparkFun Accessories USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! These cables have minor yet genius modifications that allow them to be plugged into their ports
CAB-15426
SparkFun
1:
5,08 €
84 In Stock
Mouser Part No
474-CAB-15426
SparkFun
SparkFun Accessories USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! These cables have minor yet genius modifications that allow them to be plugged into their ports
84 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories These are your standard issue USB 2.0 type A to micro USB 5-pin... but wait what's this? These cables have minor yet genius modifications that allow both ends to be plugged into their ports regardless of their orientation. No longer will you fight
CAB-15427
SparkFun
1:
7,61 €
3 In Stock
4 Expected 8/27/2026
Mouser Part No
474-CAB-15427
SparkFun
SparkFun Accessories These are your standard issue USB 2.0 type A to micro USB 5-pin... but wait what's this? These cables have minor yet genius modifications that allow both ends to be plugged into their ports regardless of their orientation. No longer will you fight
3 In Stock
4 Expected 8/27/2026
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories Give your custom enclosure a professional finish. This panel-mount extension cable bridges the gap between your project's internal USB Micro-B port and an external USB-B connection keeping your connections secure and accessible. Whether you are boxi
CAB-15463
SparkFun
1:
3,35 €
63 In Stock
Mouser Part No
474-CAB-15463
SparkFun
SparkFun Accessories Give your custom enclosure a professional finish. This panel-mount extension cable bridges the gap between your project's internal USB Micro-B port and an external USB-B connection keeping your connections secure and accessible. Whether you are boxi
63 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories This is an inexpensive 3-foot-long HDMI to Micro HDMI cable that you can use to hook up your Raspberry Pi 4 and 5 to a suitable monitor or TV. Heck you can hook up anything you want with it! Micro HDMI is less common of a medium right now even more
CAB-15796
SparkFun
1:
8,39 €
13 In Stock
Mouser Part No
474-CAB-15796
SparkFun
SparkFun Accessories This is an inexpensive 3-foot-long HDMI to Micro HDMI cable that you can use to hook up your Raspberry Pi 4 and 5 to a suitable monitor or TV. Heck you can hook up anything you want with it! Micro HDMI is less common of a medium right now even more
13 In Stock
Buy
Min.: 1
Mult.: 1
SparkFun Accessories The MyoWare 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. You will just need to insert the pin into its housing and place a biomedical sensor pad into the electrode snap. When ready stick the refer
CAB-19244
SparkFun
1:
1,12 €
21 In Stock
Mouser Part No
474-CAB-19244
SparkFun
SparkFun Accessories The MyoWare 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. You will just need to insert the pin into its housing and place a biomedical sensor pad into the electrode snap. When ready stick the refer
21 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. This cable makes it easy to connect components with a Qwiic connector to the male pins on various development pl
CAB-22726
SparkFun
1:
1,78 €
44 In Stock
Mouser Part No
474-CAB-22726
SparkFun
SparkFun Accessories This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. This cable makes it easy to connect components with a Qwiic connector to the male pins on various development pl
44 In Stock
Buy
Min.: 1
Mult.: 1
Details