SparkFun Tools & Supplies

SparkFun Accessories This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Digi. This is the SMD version that we are currently using on our shields and breakout boards.Note:** **This item is sold as each not in pairs.

SparkFun Accessories You'll have no need for a screwdriver with this terminal! This is a 4-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm

SparkFun Accessories The Solder Vacuum a great (and sometimes under appreciated) little tool for solder rework. It allows you to pull the molten solder out of a connection or via with ease. To use it you simply depress the plunger heat up your solder place the nozzle

SparkFun Accessories USB 2.0 type A to micro USB 5-pin. This is a new smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices. Works great wi

SparkFun Accessories This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces. This is not a true piezoelectric speaker but behaves similarly. Instead of a piezoelectric crystal t

SparkFun Accessories LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.

SparkFun Accessories PICAXE-08M2 microcontroller chip.PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free! PICAXE has some e

SparkFun Accessories For a long time we've had small 7-segment displays and *huge *7-segment displays but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you'd have trouble finding

SparkFun Accessories DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm center pole diameter.Datasheets: Datasheet

SparkFun Accessories Easily add a serial port to your project with this right-angle PCB-mount DE9 (also known as "DB9") female connector. It features the standard 0.318-inch mounting footprint making it a drop-in replacement or perfect for new designs. This durable con

SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of

SparkFun Accessories A simple constant current power supply that outputs 12.6VDC and 10A. It comes in a robust metal enclosure (IP68 rated) with a 100 000 hour service life. It features Over-voltage Over-current Short Circuit and Over-temperature safety features. This