Marki Microwave Signal Conditioning

Signal Conditioning The ABSD-10169PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB single ended to differential gain (low end limited by DC block).

Signal Conditioning The MPD-1260FCSP2 is a small footprint MMIC 12-60 GHz 2-Way power divider/power splitter featuring high 22 dB isolation and low 0.3 dB insertion loss in our compact CSP2 chip scale package.

Signal Conditioning The MPD-0422SCSP2 is a small footprint MMIC 4-22 GHz 2-Way power divider/power splitter featuring high 22 dB isolation and low 0.9 dB insertion loss in our compact CSP2 chip scale package.

Signal Conditioning The MPD4-0108CSP2 is a small footprint MMIC 1-8 GHz 4-Way power divider/power splitter featuring high 30 dB isolation and low 2.6 dB insertion loss in our compact CSP2 chip scale package.

Signal Conditioning The MPD-0108FCSP2 is a small footprint MMIC 1-8 GHz 2-Way power divider/power splitter featuring high 23 dB isolation and low 0.8 dB insertion loss in our compact CSP2 chip scale package.

Signal Conditioning This equalizer provides 4 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 6 dB and a 50-ohm match maintained over the entire operating range.

Signal Conditioning This equalizer provides 7.8 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 10 dB and a 50-ohm match maintained over the entire operating range.

Signal Conditioning The HLM-8011 is a high-power GaAs Schottky diode signal limiter featuring high IP3 and high power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of +9dBm.

Signal Conditioning The MFBP-00002PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBP-00002PSM is available as a 4x4mm plastic QFN.

Signal Conditioning The HLM-40PSM is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-40GHz bandwidth. It offers low insertion loss and excellent return loss from DC through Ka band and has a typical 1 dB compression point of 14 dBm.

Signal Conditioning The PBR-0003 is a 300 kHz to 3 GHz high isolation power combiner. This power combiner features a unique hand tuned construction based on a bridge coupler that enables 45 dB typical isolation across the operational bandwidth.

Signal Conditioning MPD-0226SM is a MMIC 2-way Wilkinson power divider. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MPD-0226SM is available as a 4 X 4 mm QFN package.