All Results (1.208)

RF Adapters - Tee The BTN2-0050 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.

Signal Conditioning The CBR16-0003 offers the highest directivity of any standalone 3 GHz bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.

Signal Conditioning The HLM-70CSP2 is a high-linearity GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 70GHz bandwidth. It offers low insertion loss and excellent return loss over a wide operating bandwidth.

Signal Conditioning The MMIQ-0205HSM is a miniaturized, surface-mount multi-octave 1.75-5.0 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either upconversion or downconversion.

RF Mixer MMIQ-0520HSM is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 5 to 20GHz on the RF and LO ports with an IF from DC to 6 GHz.

RF Mixer The MT3-0113HCQG is a triple balanced passive diode GaAs MMIC mixer offering high dynamic range, low conversion loss, and excellent repeatability.

RF Mixer The T3-07 is a high performance mixer featuring LO/RF from 1 MHz to 7 GHz and IF from 1 MHz to 4 GHz.

RF Mixer The T3-20G is a high performance mixer featuring LO/RF from 10 MHz to 20 GHz and IF from 1 MHz to 10 GHz.

RF Amplifier A high-linearity low noise amplifier capable of providing 15.5 dB gain, 2 dB noise figure and +26 dBm OIP3 up to 10 GHz. The amplifier is suitable for use in RF front-ends requiring low noise, high gain and excellent signal fidelity.

Attenuators The ATN02-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN02-0070CSP1 features a typical 2.1 dB attenuation with 0.1 dB attenuation flatness and 25 dB return loss across the DC-70 GHz bandwidth.

Attenuators The ATN06-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN06-0070CSP1 features a typical 6.0 dB attenuation with 0.2 dB attenuation flatness and 22 dB return loss across the operational bandwidth.

Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 10 GHz bandwidth.