All Results (1.675)

SparkFun Accessories We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a perfectly good barrel jack extension cable but the whole point of using the barrel jacks was so that we wouldn't have to hack t

SparkFun Accessories This is the Magnetic Door Switch Set a small reed switch assembly specifically designed to alert you when doors drawers or any other aperture opens. These types of switches are primarily used in home security systems. One half of the assembly set

SparkFun Accessories You don't have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 red 5mm LEDs will help alleviate any frustrations you've had with accidentally burning them out by having a resistor in the diode it

SparkFun Accessories LilyPad Button Board

SparkFun Accessories Arduino ProtoShield- Bare PCB

SparkFun Accessories LilyPad Coin Cell Battery Holder 20mm

SparkFun Accessories LilyPad LED Pink (5pcs)

SparkFun Accessories LilyPad LED Blue (5pcs)

SparkFun Accessories LilyPad LED Yellow (5pcs)

SparkFun Accessories The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C-enabled device.The Qw

SparkFun Accessories The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND 3.3V SDA and SCL) on your Arduino Nano to four Spark

SparkFun Accessories Access all the pins (i.e. ATP) of the MicroMod Processor Boards with the SparkFun MicroMod ATP Carrier Board! This board breaks out the MicroMod Processor Board's pins on the M.2 connector to 0.1" spaced female headers and PTH pads on the edge of the