All Results (1.675)

SparkFun Accessories This is a 5-pin JST-ZHR cable that's terminated with breadboard breadboard compatible male pins. It's the same cable that comes with our SPS30 Particulate Matter Sensor and is a great spare if you need one or if you happen to need to connect to a dev

SparkFun Accessories These are your standard issue USB 2.0 type A to micro USB 5-pin... but wait what's this? These cables have minor yet genius modifications that allow both ends to be plugged into their ports regardless of their orientation. No longer will you fight

SparkFun Accessories This is an inexpensive 3-foot-long HDMI to Micro HDMI cable that you can use to hook up your Raspberry Pi 4 and 5 to a suitable monitor or TV. Heck you can hook up anything you want with it! Micro HDMI is less common of a medium right now even more

SparkFun Accessories This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. This cable makes it easy to connect components with a Qwiic connector to the male pins on various development pl

SparkFun Accessories This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of you

SparkFun Accessories Surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the user to navigate using up and down selections then select by pressing the plastic piece inwards. Capable of swtiching up to 1.2

SparkFun Accessories 4-way Pacman type arcade joystick. Heavy duty design gives this joystick a great feel!Features:ABS plastic and solid alloy constructionUses 4 microswitches to detect on/off positionUnique handle designSpring return to centerVery rugged constructionRa

SparkFun Accessories Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to a 0.25" shaft. The knob slides onto the potentiometer and holds tightly with a strong friction fit.The main body of these kn

SparkFun Accessories This plastic knob accepts a 6mm shaft and has a 15mm outer diameter. They simple press-fit onto a shaft. These are clear so that they can be used with our illuminated rotary encoders.Documents:Dimensional Drawing

SparkFun Accessories It's the end of the world and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted

SparkFun Accessories Heating Pad - 5x15cm

SparkFun Accessories 7-Segment Serial Display - Blue